PL2303 Mac OS X Driver Download Download File: Mac OS X Universal Binary Driver v1.6.1 (PKG file format). For Mac OS High Sierra (version 10.13) - see NOTE below. For Mac OS X Sierra (version 10.12). For Mac OS X El Capitan (version 10.11).
For Mac OS X Yosemite (version 10.10). For Mac OS X Mavericks (version 10.9). For PL2303 H/HX/HXD/EA/RA/SA/TA/TB chip versions. For Prolific USB VID067B&PID2303 Only. Includes Driver Installation Manual NOTE: Mac OS High Sierra 10.13 introduces a new feature that requires user approval before loading new third-party kernel extensions. Go to System Preferences - Security & Privacy and click Allow.
The ICUSB232SM3 3ft USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac® or PC laptop or desktop computer through an available USB port, as though the computer offered an onboard DB9M connector. Unlike typical USB to serial converter cables where the conversion takes place at the DB9 end, the StarTech.com ICUSB232SM3 features a converter chip on the USB end. Converting at the USB source overcomes the 15ft. Technical limit of USB cables, allowing for a much greater serial DB-9 extension cable (50ft.+ is possible depending on the application) if necessary. Simple to install and use, this USB to Serial adapter is a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals. Backed by a StarTech.com lifetime warranty and free lifetime technical support.
Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system. Note: Before you continue, save any open documents and close all open programs. To disable driver signature enforcement, complete the following:. Press the Windows key + C. Click Settings Change PC Settings. In the left pane, click General.
In the right pane, under Advanced startup, click Restart now. When your system finishes restarting, complete the following:. Click Troubleshoot Advanced options Startup Settings Restart. When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.
Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled. Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system. Note: Before you continue, save any open documents and close all open programs. To disable driver signature enforcement, complete the following:.
Press the Windows key + C. Click Settings Change PC Settings. In the left pane, click Update & Recovery. In the left pane, click Recovery. Under Advanced startup, click Restart now. When your system finishes restarting, complete the following:. Click Troubleshoot Advanced options Startup Settings Restart.
When your computer restarts, driver signature enforcement will be disabled and you can install your drivers. Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.. You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.
Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.
To disable Driver Signature Enforcement, complete the following:. Click the Windows icon in the taskbar. Click Power. Press and hold the Shift key and click Restart. After your computer finishes restarting, complete the following:. Click Troubleshoot Advanced Options Startup Settings Restart. When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.
Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.. Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:. Download the latest drivers from the StarTech.com website. You can find the part number and product ID on the product’s packaging. Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C: Users yourname Downloads). Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions. In the list of extracted files, right-click the Setup.exe file and select Run as Administrator.
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2. Follow the on-screen prompts to install the device drivers and restart the computer when prompted. Once Windows has restarted, connect the USB serial adapter to your computer. Your computer will automatically complete the driver installation and your device should be ready to use. Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:. Download the latest drivers from the StarTech.com website. You can find the part number and product ID on the product’s packaging. Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C: Documents and Settings yourname My Documents Downloads).
Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions. In the list of extracted files, double-click the Setup.exe file. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
Once Windows has restarted, connect the USB serial adapter to your computer. Your computer will automatically complete the driver installation and your device should be ready to use. To confirm that Windows detects your USB device, complete the following:. Press the Windows key+ R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB controller card would be under Universal Serial Bus controllers. Your USB device is listed according to the name of the chipset.
To determine the name of the chipset of your USB device, navigate to and look on the Technical Specifications tab for your product. To confirm that the Mac OS detects your USB device, complete the following:. Click the Apple icon. Click About This Mac. Click More Info or System Report. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to and look on the Technical Specifications tab for your product. When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:. Serial cables.
Serial ports. Serial devices To test your setup components, try the following:. Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup. Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup. When you test your cables, it is recommended that you do the following:.
Test each cable individually. Use short cables when you are testing. When you test the serial ports and serial device, it is recommended that you do the following:.
Qvs Usb To Serial Drivers For Mac Windows 10
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number. If you do not see the COM port number in Device Manager see this FAQ for PCI/PCIe expansion cards: or this FAQ for USB devices:. If the device is listed with an error, follow the instructions on the website to reinstall the drivers. Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4. Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test.
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port. Take a metal paperclip or wire and cross pins 2 and 3.
If you look closely at the female end, the pins should be numbered. Open a telnet session on the COM port number of the device that you are testing.
To find out the COM port number, refer to the following FAQ:. Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing. If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.
When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click. If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8. On your keyboard, press the Windows key + X and select Control Panel. Click Hardware and Sound, then click Power Options. Click Change plan settings for the plan you want to change. Click Change advanced power settings. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled. Click OK to apply the setting.
Qvs Serial To Usb Driver
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection. Windows 7 / Vista. Click the Start button and select Control Panel. Click Hardware and Sound, then click Power Options. Click Change plan settings for the plan you want to change.
Click Change advanced power settings. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled. Click OK to apply the setting. Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection. Windows XP.
On your desktop, right-click the My Computer icon and select Properties. Click the Device Manager tab.
Expand Universal Serial Bus controllers by clicking the arrow to the left of it. Right-click the first USB Root Hub device and select Properties.
Click the Power Management tab. Clear the box next to Allow the computer to turn off this device to save power. Click OK to apply the setting. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “ Root Hub” in the name. Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
California Proposition 65 Warning Warning: Cancer and reproductive harm — Safety Measures. If product has an exposed circuit board, do not touch the product under power. If Class 1 Laser Product.
Laser radiation is present when the system is open. Wiring terminations should not be made with the product and/or electric lines under power. Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.